Soda Water Machine External CO2 Tank Fill Adapter Kit Maker Filling Station With Quick Disconnect Connector(CGA320 98inches)

Product Features: 1. Safety and health are the most important, and all materials meet food safety requirements, allowing you to use them with confidence.How it works:1. Screw pin valve into soda water machine2. Screw the nut to CO2 tank and tighten it by wrench3. Connect the quick coupler4. Open the valve of the CO2 tank5. Done, you can use your soda machine nowIf you want to remove the product from the soda water machine:1. Close valve of the CO2 tank2. Press button of soda machine to drain residual CO2(if you don't follow this guide to disconnect the coupler, the o-ring of quick coupler will be blowed out)3. Disconnect the quick coupler4. Unscrew pin valve from soda machine and unscrew nut from CO2 tankWelcome Thank you for coming to our store!

• 1. With quick disconnect connector. And fit all the sode machine with TR21-4 thread.
• 2. TR21-4 adapter has been optimized and designed to perfectly fit the soda water machine, making it easier to install without the need for tools, just tighten it by hand.
• 3. Hose length 250cm/98inches, soft and durable. Max working pressure is 9100psi/630bar, real high-pressure hose.
• 4. This item use for soda water machine/maker to external tank/cyclinder connect. Like 5LB, 20LB or 50LB commercial CO2 tanks. Allows external tank/cyclinder valve connector thread W21.8-14 or G3/4 or CGA320.
• 5. Comes with free backup o-rings and sealing gaskets.